Mental dB Math: Link Budgets Without a Calculator
Learn 1 dB ≈ 1.26, 3 dB ≈ 2, 6 dB ≈ 4, 7 dB ≈ 5 and 10 dB = 10, and you can get any other power ratio by adding dB values. A link budget is then one sum: transmit power plus antenna gains, minus path loss and other losses.
Engineer’s note: In a meeting there's no time to reach for a calculator. Memorize three facts: 10 dB is 10 times, 3 dB is 2 times, 1 dB is about 1.25 times. Build the reflex so that when someone says the PA puts out 33 dBm, your head immediately says: about a 2 watt amplifier.
For practitioners
Why dB turns multiplication into addition
A decibel value is the logarithm of a power ratio:
The log of a product equals the sum of the logs. So when you multiply power ratios together, you add their dB values. A chain of gains and losses would be a string of multiplications in linear terms. In dB it becomes a running sum. That is why RF work is done in dB, and it is why a link budget fits on the back of an envelope.
You still have to move between dB and linear ratios now and then. You need to when you sanity-check a number, turn a result into milliwatts, or judge whether a 2 dB change matters. You don't need log tables for this. A handful of anchor values covers almost every case.
The anchor values: 1, 3, 6, 7 and 10 dB
- 10 dB = ×10, exactly. 20 dB = ×100, exactly.
- 3 dB = ×1.995, about 2. So −3 dB is about 0.5.
- 6 dB = ×3.98, about 4. This is 3 + 3, so 2 × 2.
- 7 dB = ×5.01, about 5. This is 10 − 3, so 10 / 2.
- 1 dB = ×1.259, about 1.26.
Only three of these are independent: 10, 3 and 1. Six and seven follow from the others. Negative dB values are the reciprocals: −10 dB = 0.1, −6 dB ≈ 0.25, −7 dB ≈ 0.2, and −1 dB ≈ 0.79 (1/1.259 = 0.794).
The ruler above shows the anchors with their rounded and exact ratios. The bracket shows the move you will use most: 13 dB = 10 dB + 3 dB, so the ratio is 10 × 2 = 20. The exact value is 19.95.
Building any ratio from the anchors
Split any dB value into a multiple of 10 and a remainder between 0 and 9 dB. The tens give a power of ten. The remainder comes from the anchors:
| Remainder (dB) | Built as | Mental ratio | Exact |
|---|---|---|---|
| 0 | — | 1 | 1 |
| 1 | 1 | 1.26 | 1.259 |
| 2 | 1 + 1 | 1.6 | 1.585 |
| 3 | 3 | 2 | 1.995 |
| 4 | 3 + 1 | 2.5 | 2.512 |
| 5 | 6 − 1 | 3.2 | 3.162 |
| 6 | 3 + 3 | 4 | 3.98 |
| 7 | 10 − 3 | 5 | 5.01 |
| 8 | 7 + 1 | 6.3 | 6.310 |
| 9 | 6 + 3 | 8 | 7.943 |
Some examples. 37 dB = 30 + 7 dB, so 1000 × 5 = 5000. −24 dB = −30 + 6 dB, so 0.001 × 4 = 0.004 (exact 0.00398). 23 dBm = 20 + 3 dB above 1 mW, so 100 × 2 = 200 mW. 20 dBm alone is 100 mW.
Going the other way: ratio to dB
Factor the ratio into tens, twos and fives, then add the matching dB values. 400 = 100 × 2 × 2, so 20 + 3 + 3 = 26 dB. 50 = 10 × 5, so 10 + 7 = 17 dB. 1/8 = (1/2)³, so −9 dB. 0.25 is −6 dB.
Ratios that don't factor cleanly can be bracketed. A ratio of 3 sits between 2.5 (4 dB) and 3.2 (5 dB), just under 5 dB. The exact value is 4.77 dB. For a link budget, that is close enough.
A link budget by addition
A radio link is a chain of gains and losses between two absolute power levels. In dB form:
Here P_RX and P_TX are in dBm, the antenna gains are in dBi, and path loss and other losses are in dB. "Other losses" collects cable, connector, mismatch and polarization loss.
Worked example, with round input values chosen for illustration:
- Transmit power: 23 dBm (200 mW)
- Transmit antenna gain: +3 dBi → running total 26 dBm
- Receive antenna gain: 0 dBi → 26 dBm
- Path loss: −100 dB → −74 dBm
- Other losses: −3 dB → −77 dBm
To turn that into power, split −77 dBm into −80 + 3 dB. −80 dBm is 10⁻⁸ mW, or 10 pW. +3 dB doubles it, so the received power is about 20 pW. The exact value is 10^−7.7 mW = 19.95 pW.
A cross-check: the net change from transmitter to receiver is +3 + 0 − 100 − 3 = −100 dB, a ratio of 10⁻¹⁰. 200 mW × 10⁻¹⁰ = 2 × 10⁻¹¹ W = 20 pW. Both routes agree.
Small changes are easy to read too. Add 1 dB of connector loss and the result moves to −78 dBm, about 0.79 × 20 ≈ 16 pW. Loss placed ahead of the receiver's first gain stage also hurts sensitivity. See Why Front-End Loss Before the LNA Costs Sensitivity.
How much error the shortcuts add
10 log10 2 = 3.0103 dB, so treating 3 dB as exactly ×2 is off by about 0.01 dB. That is 0.25 percent in power. The errors build up slowly. Ten stacked "3 dB = 2" steps give 2¹⁰ = 1024 against a true 1000, about 2.4 percent or 0.1 dB. The 1 dB and 7 dB anchors are closer still: 1.26 against 1.259, and 5 against 5.01. The inputs to a real link budget are rarely known to a tenth of a dB, so the mental shortcuts are not what limits your answer. For exact conversions, use the dBm to Watts Converter.
In plain words · for students and beginners
Mental dB math in plain words
An everyday picture
Think of power as a stack of equal blocks. 0 dB means you keep the stack you have, one block. Each +3 dB doubles the stack: 2 blocks, then 4 blocks at +6 dB. +10 dB multiplies it by ten, so 10 blocks. +13 dB is +10 dB and then +3 dB, so 10 blocks doubled, which is 20. Going down 3 dB halves the stack: 1 block becomes half a block.
Where the picture breaks down: a stack of blocks makes you think of adding blocks, but dB steps multiply. Going +3 dB from 10 blocks gives 20 blocks, not 12. Also, real power changes smoothly, so 1 dB is about 1.26 blocks, not a whole number.
The same link budget, step by step
A link budget tracks how much power reaches the receiver. dBm means "decibels compared with 1 milliwatt". dBi means "antenna gain compared with an ideal antenna that radiates equally in all directions".
- Start with the transmitter: 23 dBm, which is 200 milliwatts.
- Add the transmit antenna gain: 23 + 3 = 26.
- Add the receive antenna gain: 26 + 0 = 26.
- Subtract the loss over the air (path loss): 26 − 100 = −74.
- Subtract the cable and connector losses: −74 − 3 = −77 dBm.
- Turn it into power: −80 dBm is 10 picowatts (a picowatt is a millionth of a millionth of a watt). Another 3 dB doubles that, so about 20 picowatts.
Mistakes beginners make
- Multiplying dB values. In dB you add and subtract. You only multiply after converting back to plain ratios.
- Losing the minus sign. Losses reduce power. Subtract them once, and don't also write them as negative numbers.
- Mixing up dB and dBm. dBm is an amount of power. dB is only a change. A budget has one starting power in dBm, and everything after it is dB or dBi.
- Using "3 dB = half" for voltage. These anchors are for power ratios.
Remember
- 3 dB ≈ ×2, 10 dB = ×10, and 13 dB = 10 + 3 ≈ ×20.
- Adding dB values is the same as multiplying the ratios.
- Received power = transmit power + antenna gains − path loss − other losses.
Related pages on RF View
Frequently asked questions
What is 3 dB as a power ratio?
3 dB is a power ratio of 1.995, which rounds to 2. Going the other way, −3 dB is about 0.5, so half the power.
How do I convert 13 dB to a power ratio without a calculator?
Split it into 10 dB + 3 dB. Ratios multiply when dB values add, so the ratio is 10 × 2 = 20. The exact value is 19.95.
Why can the terms of a link budget simply be added?
Each gain or loss multiplies the power by some ratio. The logarithm of a product is the sum of the logarithms, so in dB those multiplications become additions and subtractions.
How accurate are the mental dB approximations?
Taking 3 dB as exactly 2 is off by about 0.01 dB. Even after ten stacked 3 dB steps the error is only about 0.1 dB, because 2 to the 10th power is 1024 and the true ratio is 1000.